Konica Minolta bizhub 750 - Manual (Page 331)

8 Application Functions
8-58 bizhub 750/600
Application F
unctions
Chapter 8
4
In the Page Margin screen, touch [Edit Margin].
To cancel changes to the settings, touch [Cancel].
– To cancel the “Page Margin” function, touch [OFF].
The Edit Margin screen appears.
5
Specify the shift direction and amount.
– If [No Shift] is selected, the shift width is set to 0 in. This setting can
also be specified by pressing the [C] (clear) key.
– Touch [
↔] to switch between the integer and the fraction, touch
[–] and [+] to specify the width to be erased, and then touch [OK].
– If a decimal value is displayed in the screen, use the keypad to type
in the setting. For details on switching between decimal and frac-
tion values, refer to “System Setting” on page 12-14.
– When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting. If a value outside the allowable
range is specified, the message “Input Error” appears. If “Input Er-
ror” appeared or if the distance was incorrectly entered, press the
[C] (clear) key to erase the value, and then specify the correct value.
– For a horizontal shift, touch [Left] or [Right] to specify the shift di-
rection. For a vertical shift, touch [Top] or [Bottom] to specify the
shift direction. Both a horizontal shift and a vertical shift can be
specified together.