Konica Minolta bizhub 750 - Manual (Page 201)

4 Additional Copy Operations
4-26 bizhub 750/600
Addition
al Copy Op
era
tions
Chapter 4
To set the “Enlarge Display Timer Setting” function
When the automatic system reset operation is performed in Enlarge Display
mode, a message requesting confirmation to cancel Enlarge Display mode
can be displayed.
In addition, it is possible to specify the length of time that the message re-
questing confirmation to cancel Enlarge Display mode is displayed.
The factory default setting is [OFF].
0 The “Enlarge Display Timer Setting” function is available only in Enlarge
Display mode.
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 4-23)
2
Touch [Enlarge Display Timer Setting] or press the [2] key in the key-
pad.