Konica Minolta bizhub 750 User Manual
Page 361
8
Application Functions
8-88
bizhub 750/600
Application F
unctions
Chapter 8
Printing the Distribution Number (“Set Numbering” function)
!
Detail
The distribution number is normally printed as a four-digit number. If
“Start Number” is set to “1”, “0001” is printed.
To copy using the “Set Numbering” function
0 Printing is not possible with “Set Numbering” function if the hard disk
drive is not installed.
1
In the Stamp/Overlay screen, touch [Set Numbering].
–
For details on displaying the Stamp/Overlay screen, refer to “To
display the Stamp/Overlay screen” on page 8-79.
The Set Numbering screen appears.
2
Using the keypad, type in the starting number.
–
The starting number can be set between 0 and 9999.
–
The distribution number is normally printed as a four-digit number.
If “Start Number” is set to “1”, “0001” is printed.
–
To cancel changes to the settings, touch [Cancel].
–
To cancel the “Set Numbering” function, touch [OFF].