Konica Minolta bizhub 750 - Manual (Page 461)

12 Utility
12-48 bizhub 750/600
Utility
Ch
ap
te
r 12
8
Press the [Start] key.
The test pattern is printed.
9
Touch [Close].
The Half-Fold Position screen appears again.
10
Compare the width of the left pages of the copy sample with the width
of the right pages to check for the center of the paper.
11
If the desire print results
are not achieved,
change the adjustment
value.
– If the folding position
is too far to the right
of the center of pa-
per, touch [+] (be-
tween 0.1 mm and
12.7 mm).
– If the folding position
is too far to the left of
the center of paper,
touch [–] (between
0.1 mm and 12.8
mm).
– To scroll through the
values quickly, touch
[+] or [–] continuous-
ly.
12
Repeat steps 6 through 11 until the desired print results achieved.
13
Touch [OK].
– To cancel changes to the settings, touch [Cancel] .