Konica Minolta bizhub 750 - Manual (Page 156)

Basic Copy Operations 3
bizhub 750/600 3-57
Ba
sic Copy Op
er
ations
Chapter 3
Separating Copies by Pages (“Group” Setting)
0 As the default “Group” is selected.
0 If “Offset” is selected while no finisher is installed, crisscross sorting will
be performed.Printed copies will be fed out and sorted in an alternating
crisscross pattern if the following conditions are met.
- 8-1/2 × 11 or 5-1/2 × 8-1/2 size paper is used.
- Paper of the same size and type is loaded with the
w orientation in one
paper tray and with the
v orientation in another tray.
- The “Auto Paper Select” setting is selected.
- The “Auto Paper Select” setting is not selected when the “Mixed Origi-
nal” setting is selected.
0 If “Offset” is selected while a finisher is installed, printed copies are fed
out and stacked on top of each other with each set shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Group].
– To separate each set of pages, touch [Offset]. To cancel the “Off-
set” setting, touch [Offset] again to deselect it.
3
Touch [OK].
The Basic screen appears again.