Konica Minolta bizhub 750 - Manual (Page 360)

Application Functions 8
bizhub 750/600 8-87
Application F
unctions
Chapter 8
– If a value outside the allowable range is specified, the message “In-
put Error” appears. If “Input Error” appeared or if the distance was
incorrectly entered, press the [C] (clear) key to erase the value, and
then specify the correct value.
? What are the limits on the adjustment amount?
% The print position can be finely adjusted in 1/16 in increments.
? Can no adjustments be made?
% To make no left/right or up/down adjustments, touch [No Adj.].
9
Touch [OK].
The Print Position screen appears.
10
Touch [OK] two times.
11
If necessary, specify any other copy settings.
12
Using the keypad, type in the desired number of copies.
13
Press the [Start] key.