Konica Minolta bizhub 750 User Manual
Page 356
Application Functions
8
bizhub 750/600
8-83
Application F
unctions
Chapter 8
–
If a value outside the allowable range is specified, the message “In-
put Error” appears. If “Input Error” appeared or if the adjustment
value was incorrectly entered, touch [No Adj.] or press the [C] (clear)
key, and then specify the correct value.
?
What are the limits on the adjustment amount?
% The print position can be finely adjusted in 1/16 in increments.
?
Can no adjustments be made?
% To make no left/right or up/down adjustments, touch [No Adj.].
5
Touch [OK].
The Print Position screen appears again.
6
Touch [OK] three times.
7
If necessary, specify any other copy settings.
8
Using the keypad, type in the desired number of copies.
9
Press the [Start] key.
Printing the Page Number (“Page #” function)
To copy using the “Page #” function
1
In the Stamp/Overlay screen, touch [Page #].
–
For details on displaying the Stamp/Overlay screen, refer to “To
display the Stamp/Overlay screen” on page 8-79.
The Page # screen appears.