2 specifying the paper setting for the bypass tray – Konica Minolta bizhub 750 User Manual
Page 245
7
Copy Paper/Original
7-8
bizhub 750/600
Copy Paper/Original
Chapter 7
7.2
Specifying the Paper Setting for the Bypass Tray
This section describes the procedures for specifying the size and type of pa-
per loaded in the bypass tray.
!
Detail
For details on specifying paper settings for the tray 3 and 4, refer to
“Specifying Paper Settings for Paper Trays” on page 7-22.
For details on loading the paper into the bypass tray, refer to “Loading
Paper Into the Bypass Tray” on page 2-44.
To automatically detect the paper size (“Auto Paper Select” setting)
The size of the paper loaded into the bypass tray can be detected automat-
ically.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for the bypass tray, and then touch [Change Tray Set-
tings].