Utility ch ap te r 12 – Konica Minolta bizhub 750 User Manual
Page 434
Utility
12
bizhub 750/600
12-21
Utility
Ch
ap
te
r 12
Copier Setting
Parameter
Description
Settings (Default set-
tings are underlined.)
Auto Booklet ON When
Fold & Staple
Select whether or not the “Booklet”
function is selected automatically when
the “Fold & Staple” setting is selected.
Auto Select Booklet/
OFF
Auto Zoom For Com-
bine/Booklet
Select whether or not the preset zoom
ratios are automatically selected when
“Auto Paper Select” is set and a Com-
bine Originals or Booklet setting is se-
lected.
• Auto Display Zoom Ratio:
The following zoom ratios are set.
2 in 1, Booklet × 0.647
4 in 1 × 0.500
8 in 1 × 0.323
• OFF:
No zoom ratio is selected automati-
cally.
Auto Display Zoom Ra-
tio/ OFF
Sort/Group Auto Change
Select whether or not the “Sort” setting
is automatically selected when 2 or more
copies are set to be printed in a single
job.
• ON:
When a document is loaded into the
ADF and the [Start] key is pressed, the
“Group” setting is automatically se-
lected if the document consists of
only one page or the “Sort” setting is
automatically selected if the docu-
ment consists of two or more pages.
• OFF:
The “Sort” and “Group” settings are
not selected automatically.
ON/ OFF
Auto Zoom (Platen)
Select whether or not the “Auto Zoom”
setting is selected when a paper tray is
selected (except when “Auto Paper Se-
lect” is set).
ON/ OFF
Auto Zoom (ADF)
Select whether or not the “Auto Zoom”
setting is selected when a paper tray is
selected (except when “Auto Paper Se-
lect” is set).
ON/ OFF
Select Tray when APS
OFF
Select which paper tray is selected when
the “Auto Paper Select” setting is can-
celed.
• Tray Before APS ON:
The paper tray that was being used
before the “Auto Paper Select” setting
was selected is selected.
• Default Tray:
The paper tray set as the default is se-
lected.
Tray Before APS ON/
Default Tray
Select Tray for Insert
Sheet
Select the default paper tray loaded with
paper for the cover pages and Insert
sheets.
Tray1/ Tray2/ Tray3/
Tray4/ Bypass tray/ LCT/
PI