Konica Minolta bizhub 750 - Manual (Page 318)

Application Functions 8
bizhub 750/600 8-45
Application F
unctions
Chapter 8
7
Touch [Set Range], and then specify the scanning area.
– Touch [ ] or [ ] to display a different list of sizes.
– If [Custom Size] is touched, the Custom Size screen appears.
Touch [X] or [Y] to select the dimension.
– Touch [
↔] to switch between the integer and the fraction, touch
[–] and [+] to specify the dimensions and then touch [OK].
– If a decimal value is displayed in the screen, use the keypad to type
in the setting. For details on switching between decimal and frac-
tion values, refer to “System Setting” on page 12-14.
– When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting.
If a value outside the allowable range is specified, the message “In-
put Error” appears. If “Input Error” appeared or if the value was in-
correctly entered, press the [C] (clear) key to erase the value, and
then specify the correct value.
8
Touch [OK] three times.
Standard Size screen
Custom Size screen