Konica Minolta bizhub 750 User Manual
Page 267
7
Copy Paper/Original
7-30
bizhub 750/600
Copy Paper/Original
Chapter 7
3
Touch [Oversized Paper].
–
The Paper Size screen that appears differs depending on the paper
size type that is selected.
Buttons for the available paper sizes appear.
4
Select the size of the paper to be loaded.
–
Touch [X] or [Y] in “Change size”, touch [
↔] to switch between the
integer and the fraction, and then touch [–] and [+] to specify the
size of the paper.
–
If a decimal value is displayed in the screen, use the keypad to type
in the setting. For details on switching between decimal and frac-
tion values, refer to “System Setting” on page 12-14.
–
If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message “Input Error” appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
5
Select the desired image position.
6
Touch [OK].