5 adjusting the printer – Konica Minolta bizhub 750 User Manual
Page 454
Utility
12
bizhub 750/600
12-41
Utility
Ch
ap
te
r 12
12.5
Adjusting the Printer
Adjusting the Starting Print Position at the Leading Edge Position
The starting print position at the leading edge of each type of paper (with re-
spect to the paper feed direction) can be adjusted.
Adjustments can be specified for each paper type.
0 The starting print position is adjusted during manufacturing of the ma-
chine. Normally, this position will not need to be adjusted.
1
Display the Administrator Setting screen.
–
For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Setting Screen” on page 12-39.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [1 Leading Edge Adjustment].
The Leading Edge Adjustment screen appears.
6
Touch the button for the paper type to be set.
7
Touch [Test Copy].
The Test Copy screen appears.