Konica Minolta bizhub 750 - Manual (Page 96)

Before Making Copies 2
bizhub 750/600 2-51
Before Making C
o
pies
Chapter 2
2.8 Loading Paper of a Different Size Into Paper Trays
The paper loaded into the tray 3 and 4 can be changed to that of a different
size.
2
Note
To load paper of a different size into the tray 1 and 2 and the LCT (LU-
401/LU-402), contact your technical representative.
Changing the Size of Paper That Is Loaded
1
Pull out the paper tray for the tray 3 or 4.
2
Raise the paper take-up roller.
3
Remove the trailing-edge guide, and then insert it at the position for the
desired paper size.
– Press the button to
remove the trailing-
edge guide.
– Insert the trailing-
edge guide into the
hole correspond-
ing to the size indi-
cated on the
bottom plate.
1
2