Konica Minolta bizhub 750 - Manual (Page 432)

Utility 12
bizhub 750/600 12-19
Utility
Ch
ap
te
r 12
Original Image Density
Display Setting
Sub Screen Display ON/OFF
Scan Basic Screen Default Setting
Copy Screen
Description Settings (Default set-
tings are underlined.)
Specify the initial density of the quality of the document. A density
can be specified for each Orig. Image Type setting. Text:
0 (light) to 5 (dark): 3
Text/Photo:
0 (light) to 5 (dark): 3
Dot Matrix Original:
0 (light) to 5 (dark): 2
Photo:
0 (light) to 5 (dark): 1
Description Settings (Default set-
tings are underlined.)
Display Type Sub Area
• Setting value:
An image of the selected setting is displayed.
• Job List:
A list of the jobs that are being performed is displayed.
Setting value/ Job List
Parameter Description
Default Tab Specify settings for scanning. For details, refer to the Network Scan-
ner Operations of the bizhub 750/600 User’s Guide.
Program Default
Address Book Default In-
dex
Address Type Symbol
Display
Parameter Description Settings (Default set-
tings are underlined.)
Copy Operating Screen Select the screen that is displayed while
printing.
• ON: A copy job can be reserved by
touching [Program Next Job] in the
screen with the message “Now print-
ing.”, which appears during printing.
• OFF: A copy job can be reserved
while the Basic screen in Copy mode
is displayed.
ON/ OFF