Yokogawa ADMAG AXF - Manual (Page 13)

IM 1E10C1-E 4-2
4. BASIC OPERATING PROCEDURES
4.2 Types of Display Data
The Display Data is divided into 5 types as follows.
Alarm Display Mode
Auto Zero Mode
Setting Mode
Indicator Error Mode
This mode indicates the instantaneous flow rate and totalization data.
Display settings can be set in the Setting Mode and parameter
No.“d01” (DISP SELECT) by using infrared switches, Brain Terminal,
or HART communicator.
Flow Rate Display Mode
When an alarm occurs in the
Flow Rate Display Mode, this
mode indicates the alarm code
number and normal data
alternately.
This mode is indicated during
automatic zero setting.
This mode makes certain about
contents of parameter and
rewrite data.This mode is called
up from Flow Rate Display Mode
by touching the SET key for 3
sec. and inputting a password.
This mode is shown in case the
keys keep staying “ON” by stains
or obstacles on front glass of the
case.The error is canceled by
cleaning them.
Please refer to section 4.2.4
Please refer to section 4.2.5
Please refer to section 4.2.6
Pass-Word Input Mode
Please refer to section 4.2.2
Data Changing Mode
Data confirmation Mode
Number Changing Mode
Please refer to section 4.2.3