Yokogawa ADMAG AXF - Manual (Page 97)

IM 1E10C1-E 11-5
11. PARAMETER LIST
Indicator Name R/W Description Data Range, Units
BRAIN
Terminal
Decimal
Point
Default
Value
— E00 TOTAL SET R
E01 E01 TOTAL UNIT (00) n UNIT / P PULSE/s
(01)
µ
UNIT / P
(02) m UNIT / P
(03) UNIT / P
(04) k UNIT / P
(05) M UNIT / P
(06) PULSE / s
E02 E02 TOTAL SCALE 0 to 3.0000 0 to 4 0 W
E03 E03 TOTAL LOWCUT 0 to 100% 3 W
E04 E04 TOTAL SET (00) INHIBIT INHIBIT W
(01) ENABLE
E05 E05 TL SET VALUE 0 to 999999 0 W
E06 E06 TOTAL SWITCH 0 to 999999 0 W
— E10 TL USER UNIT ASCII 8 characters W
— E60 SELF CHECK GOOD R
to
EEPROM DEFAULT
— F00 PULSE SET R
F01 F01 PULSE UNIT (00) n UNIT / P PULSE/s W
(01)
µ
UNIT / P
(02) m UNIT / P
(03) UNIT / P
(04) k UNIT / P
(05) M UNIT / P
(06) PULSE / s
F02 F02 PULSE SCALE 0 to 30000 0 to 4 0 W
F03 F03 PULSE LOWCUT 0 to 100% 3 W
F04 F04 PULSE WIDTH (00) 50% DUTY 50% DUTY W
(01) 0.5 ms
(02) 1 ms
(03) 20 ms
(04) 33 ms
(05) 50 ms
(06) 100 ms
— F60 SELF CHECK GOOD R
to
EEPROM DEFAULT
Totalization functions.
Selects totalization rate unit. (“UNIT”
in the selection on the left represents the
“Base vol unit” selected.)
Sets totalization rate.
Sets low cut width of totalization.
Inhibits or enables forward direction
totalization and reverse direction
totalization from being preset and reset,
respectively.
Sets forward direction totalization
present value.
Set switching level when using status
output function as totalization switch
function.
Sets user-defined unit displayed in “A30.”
Displays self-check result.
Pulse output functions.
Selects pulse rate unit. (“UNIT” in the
selection on the left represents the
“Base vol unit” selected.)
Sets pulse rate.
Sets low cut width of pulse output.
Selects pulse width.
Displays self-check result.