Yokogawa ADMAG AXF - Manual (Page 41)

IM 1E10C1-E 6-3
6. OPERATION VIA BRAIN TERMINAL
6.3 BT200 Key Functions
(1) Entry of Alphanumeric Characters
Numbers, codes and letters can be entered in combinations of the alphanumeric keys and
the SHIFT key.
• Entry of numbers, codes and a space (0 to 9, ., -, )
Entering of them is possible by using the alphanumeric keys.
Example of Entry Key Operation
X W
–
N M
1
H G
4
R Q
3
Z Y
SPACE
V U
. –4.3
1 –0.3
V U R Q .
3
X W
–
T S
0
B A
7
■
SHIFT
■
SHIFT
The letter on the left
side of the
alphanumeric key is
entered. The letter on the
right side of the
alphanumeric key is
entered.
V U
Example of Entry Key Operation
■ X W
–
■
SHIFT SHIFT
J I
5
J I
5
B A .
WIC
J. B
■
SHIFT
D C
7
■
SHIFT
8
■
SHIFT
• Selection of capital/small letters
Capital and small letters can be selected alternately by pressing the function key [F2]
(CAPS).
F2
Entry of capital letters
CODE CAPS CLR ESC
Entry of small letters
CODE caps CLR ESC
F1 F3 F4 F1 F2 F3 F4
• Entry of codes
Codes can be entered by pressing the function key [F1] (CODE). Every time [F1]
CODE is pressed, the codes are displayed at the cursor position in the order shown
below.
/ . - , + * ) ( ' & % $ ” !
To enter characters after the above codes, move the cursor using the [>] key before
entry.
Example of Entry Key Operation
L W
6
■
SHIFT
l/m
F2 F1
> X W
1
■
SHIFT
( m ) ( / ) ( l ) (Small letter)
[
• Entry of letters
Press an alphanumeric key while one
of the SHIFT keys is pressed and the
letter on the same side of the key as
the SHIFT key that is pressed can be
entered. Press the SHIFT key each
time when entering a letter.