Yokogawa ADMAG AXF - Manual (Page 24)

IM 1E10C1-E 5-5
5. FUNCTION AND DATA SETTINGS
᭹ Setting Volume Measurement (m
3 ) and Time Unit (/h)
Switch Operation Display Description
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
Change the display into the number changing mode through the
setting mode.
By touching the SHIFT and INC key, please select the
parameter No.“b04”.
And by touching the SET key,
change into the data changing mode.
By touching the INC key, set the “01”
(equivalent as m
3 )
By touching the SET key,
whole display is blinking.
And touching the SET key again,
the data is completed.
And by touching the SET key, the data is completed and the
display goes back into the number changing mode.
By touching the SHIFT and INC key, select the parameter No.
“b05”.
By touching the SET key, change the display into the data
changing mode.
By touching the INC key, set the
“01” (equivalent as /h)
By touching the SET key,
whole display is blinking.
And touoching the SET key again, the data is completed.
* If keys that except SET key are touched during display is
blinking, input data is not completed and back to former data.
By touching the SET key again, the display goes back to the
number changing mode.
(Select /h)
(Select m 3 )
Time Unit
/d
/h
/m
/s
Code
00
01
02
03
Volume Unit
km 3 (10 3 X m 3 )
m 3
L(liter)
cm 3 (10 -2 X m) 3
M gal
k gal
gal
m gal
k bbl
bbl
m bbl
u bbl
m
ft.
Code
00
01
02
03
04
05
06
07
08
09
10
11
12
13
(Setting is now completed)
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
Defalt : 12
Defalt : 03