Yokogawa ADMAG AXF - Manual (Page 44)

IM 1E10C1-E 6-6
6. OPERATION VIA BRAIN TERMINAL
Display Description
Press ENTER key twice at an interval of a few seconds.
The display as shown on the left appears.
If the data is correct, press F4 key [OK].
The parameter panel is displayed again.
Select “B07:NOMINAL SIZE” by feeding the page with the arrow
key.
Press ENTER key to display the data setup panel.
Enter “2.00” using the alphanumeric keys and press ENTER key
twice at an interval of a few seconds.
Default:10.00(for inch) 100.00(for mm)
(If the security panel appears, enter the security code.*)
PARAM
B04: FLOW UNIT
m
B05: TIME UNIT
/S
B06: SIZE UNIT
inch
DATA DIAG ESC
SET
B06:SIZE UNIT
mm
< mm
>
< inch >
ESC
SET
B03:SIZE UNIT
inch
PARAM
B05: TIME UNIT
/S
B06: SIZE UNIT
inch
B07: NOMINAL SIZE
10.00 inch
DIAG DATA ESC
SET
B07:NOMINAL SIZE
10.00 inch
002.00
ESC
ENTER
ENTER
× 2
NO OK
F4
ENTER × 2
SET
B07:NOMINAL SIZE
2.00 inch
NO OK
F4 If the data is correct, press the F4 key [OK].
“2.00”
PARAM
B05: TIME UNIT
/S
B06: SIZE UNIT
inch
B07: NOMINAL SIZE
2.00 inch
DIAG DATA ESC
The parameter panel appears again.
The setting is completed.
* For entry of the security code, see IM1C0A11-01E.