Yokogawa ADMAG AXF - Manual (Page 96)

IM 1E10C1-E 11-4
11. PARAMETER LIST
Indicator Name R/W Description Data Range, Units
BRAIN
Terminal
Decimal
Point
Default
Value
b13 B13 VELOCITY CHK 0 to 32.767 m/s 3 R
b14 B14 FLOW DIR (00) FORWARD FORWARD W
(01) REVERSE
b30 B30 REV.SPAN 1 to 3.0000 0 to 4 1.0000 W
b31 B31 BI DIREC HYS 0 to 10% 2 W
b33 B33 FOR.SPAN2 1 to 3.0000 0 to 4 1.0000 W
b34 B34 AUTO RNG HYS 0 to 15% 10 W
b36 B36 LOW ALARM –10 to 110% –10 W
b37 B37 L. ALARM HYS 0 to 15% 5 W
— B60 SELF CHECK GOOD R
to
EEPROM DEFAULT
— C00 ADJUST R
C01 C01 ZERO TUNING (00) INHIBIT ENABLE W
(01) ENABLE
C02 C02 MAGFLOW ZERO 0 to
±
99.99 2 0.00 W
— C60 SELF CHECK GOOD R
to
EEPROM DEFAULT
— D00 DISP SEL R
d01 D01 DISP SELECT (00) RATE(%) RATE(%) W
(01) RATE
(02) FOR. TOTAL
(03) REV. TOTAL
(04) DIF. TOTAL
(05) RATE(%) / FOR. TTL
(06) RATE / FOR. TTL
(07) RATE / RATE(%)
(08) RATE(%) / REV. TTL
(09) RATE / REV. TTL
(10) RATE(%) / DIF.TTL
(11) RATE / DIF.TTL
d02 D02 FL USER SEL (00) NOT PROVIDED NOT W
(01) PROVIDED PROVIDED
d03 D03 FL USER SPAN 0 to 3000 0 to 4 100 W
— D10 FL USER UNIT ASCII 8 W
characters
— D60 SELF CHECK GOOD R
to
EEPROM DEFAULT
Displays span in m/s.
Selects flow direction.
Sets span for reverse direction.
Sets hysteresis when change in flow
direction.
Sets the second span for forward
direction.
Sets hysteresis when change in Auto 2
ranges.
Sets low limit alarm.
Sets hysteresis for low limit alarm.
Displays self-check result.
Automatic zero adjustment functions.
Inhibits or enables automatic zero
adjustment.
Excecutes automatic zero adjustment
and displays zero correction value.
Displays self-check result.
Display functions.
Selects display items on flowmeter
indicator.
Selects whether “PV” is displayed with
user-defined unit.
Sets value displayed in “PV” at 100%
output when “Fl user sel” is provided.
Sets user-defined unit displayed in
“A20.”
Displays self-check result.