Yokogawa ADMAG AXF - Manual (Page 42)

IM 1E10C1-E 6-4
6. OPERATION VIA BRAIN TERMINAL
(2) Function Keys
The functions of the function keys vary with the commands being displayed on the
display panel.
MENU
A: DISPLAY
B: SET
C: ADJUST
D: DISP SEL
E: TOTAL SET
F: PULSE SET
HOME SET ADJ ESC
F2 F1 F3 F4
Function keys
Command
ADJ
CAPS/caps
CLR
CODE
COPY*
DATA
DEL
DIAG
ESC
FEED*
HOME
LIST*
NO
OK
PARM
PON/POFF*
PRNT*
SET
SLOT
GO*
STOP*
UTIL
Calls up the zero-adjustment menu.
Changes the capital/small letter mode.
Clears entered data/deletes all data.
See the above “Entry of code.”
Prints parameters on the panel.
Updates parameter data.
Deletes one character.
Calls up the self-check panel.
Returns to the previous panel.
Paper feed.
Calls up the home menu (A:DISPLAY).
Prints all parameters of the menus.
Setting stop/re-setting. Returns to the previous panel.
Goes to the next panel.
Parameter number setting mode.
Printer output of data whose setting was changed Mode on/off.
Changes to the print mode.
Calls up the setting menu. (B:SETTING)
Returns to the slot selection panel.
Starts print out.
Stops printing.
Calls up the utility panel.
Description
*The command is available only for BT200-P00.
6.4 Displaying Flow Rate Data
Flow rate data can be displayed on the BT200 panel according to the following proce-
dure.
● A maximum of three data items can be displayed on one panel.
● Data are updated at an interval of 5 seconds.
● The arrow keys, [
∧
], [
∨
], [<] or [>], are used for page feeding or
item selection.
Display Description
Turn the power on and the panel as shown on the left appears after
“Please wait...” is displayed for a few seconds.
Pressing the ENTER key causes the initial data panel as shown on
the left to be displayed.
The tag number specified upon ordering has been entered.
Pressing the F4 key [OK] or the ENTER key causes the menu panel
as shown on the left to be displayed.
Select “A:DISPLAY” on the menu screen with the inverse video bar
and press the ENTER key to make the flow data panel appear.
--WELCOME--
BRAIN TERMINAL
ID:BT200
Check cable connection
and press the ENT key.
UTIL FEED
ENTER
PARAM
A10:FLOW RATE(%)
0.6 %
A20:FLOW RATE
0.06 m3/h
A30:TOTAL
0
DATA PRNT DIAG ESC
PARAMETER
01:MODEL
SE14-A00
02:TAG NO.
03:SELF CHECK
GOOD
OK
MENU
A:DISPLAY
B:SET
C:ADJUST
D:DISP SEL
E:TOTAL SET
F:PULSE SET
ENTER
ENTER
HOME SET ADJ ESC
F4 or
ON/OFF
Inverse video bar