Yokogawa ADMAG AXF - Manual (Page 93)

IM 1E10C1-E 11-1
11. PARAMETER LIST
11. PARAMETER LIST
11.1 Parameters for ADMAG SE Indicator and BRAIN
Terminal
This chapter describes ADMAG SE parameters for its indicator and BRAIN Terminal.
● Description of Items
BRAIN
Terminal
Indicator Name
Data Range,
Units
Decimal
Point
Default
Value
R/W Description
Parameter number for ADMAG SE indicator
Parameter number for BRAIN terminal
Parameter name
Indicate initial set value (When shipped from the
factory)
R: Read only W: Write enabled
Describes the nature of the parameter
The figure in ( ) shows the number for selecting
data on ADMAG SE indicator. The desired
number can be entered when ADMAG SE
indicator is in the setting mode.
Indicates the range of allowable settings and the
units used.16 alphanumerics can be entered when
“16 ASCII characters” is specified.
Numbers indicate the position of decimal point
and its range of movement within the data
display.
Example :
0 to 4
: Can be moved in the range 0 to 4
4 : Fixed at 4