Yokogawa ADMAG AXF - Manual (Page 92)

IM 1E10C1-E 10-3
10. OUTLINE
■ Optional Specification
T09 EPS
Note : In case of requirement of EN10204 3.1B for Material Certificate, contact YOKOGAWA office.
W aterproof Glands Waterproof glands are attached to all wiring ports. For JIS G1/2 only. /ECG
Lightning Protector Built-in Lightning Protector /A
Epoxy Coating Coating is changed to Epoxy coating. /X1
CENELEC ATEX (KEMA) Explosion proof EExdIICT6 ; Group II Category 2 G
Explosion Proof Type (only for size 15 to 200mm) /KF2
SAA Explosion Proof Type Explosion proof ExdIICT6 (only for size 15 to 200mm) /SF1
GOST Certificate Calibration Certificate for GOST (Only for products produced at YMF) /GOS
CSA Explosion Proof Type Explosion proof (only for size 15 to 200mm) /CF1
FM Explosion Proof Type Explosion proof/Nonincendive (only for size 15 to 200mm) /FF1/FN1
High Anti-corrosion Coating Coating is changed to three-layer coating.
(Urethane coating on two-layer Epoxy coating)
/X2
Painting Color Change Black, Munsell code; N1.5 /P1
Jade Green, Munsell code; 7.5BG4/1.5 /P2
Metallic Silver /P7
Calibration Certificate Level 2: Declaration and Calibration Equipment List /L2
Level 3: Declaration and Primary Standard List /L3
Level 4: Declaration and YOKOGAWA Measuring Instruments Control System /L4
DC Noise Suppression Eliminating DC Noise (Size 15mm(0.5in.) or larger; Conductivity 50
µ
S/cm or higher) /ELC
Burn Out Down Current output at CPU failure is set to "Downward(2.4mA DC or less)"
Without /C1 : Upward(21.6mA DC or more)
/C1
W aterproof Glands with Union Joints Waterproof glands (union joints) are attached to all wiring ports. For JIS G1/2 only. /ECU
Item Specification Code
■ EXTERNAL DIMENSION
Magnetic Flow Converter
230 (9.1)
160 (6.3) 40
(1.6)
31
(1.2)
133 (5.2)
123 (4.8)
170 (6.7)
48 (1.9)
51 (2.0)
240 (9.5)
102(4.02)
31
(1.2)
SD8d.eps
Weight 2.8kg (6.16 lb)