Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis - Manual (Page 12)

2 Publication 2080-QS001A-EN-E - January 2013
Chapter 1 Create a Micro800 Project
Create a Micro800 Project in Connected Components Workbench
Launch the Connected Components Workbench software.
1. On the Device Toolbox, expand
the list of Controllers by clicking
the + sign.
TIP If your controller is online, use the Discover feature to
automatically discover your controller.
IMPORTANT Make sure that your controller is one of the following
compatible controllers:
• 2080-LC30-24QBB
• 2080-LC30-24QVB
• 2080-LC30-48QBB
• 2080-LC30-48QVB
• 2080-LC50-24QBB
• 2080-LC50-24QVB
• 2080-LC50-48QBB
• 2080-LC50-48QVB
IMPORTANT Motion control on Micro830 controllers require firmware revision 2
or later.