Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis - Manual (Page 13)

Publication 2080-QS001A-EN-E - January 2013 3
Create a Micro800 Project Chapter 1
2. Select major revision 2 when
manually adding a Micro830
controller.
3. Drag your controller onto the
Project Organizer pane.
4. Go to File → Save Project As.
Then, provide a project name for
your project.
5. Click OK.
TIP Optional PanelView Component Program
This simulation project can also include a PanelView Component program to
allow for easier monitoring and toggling of axis parameter values through a
PVc screen. The code for this optional program is downloadable from the
following link, along with the complete code for this project:
http://www.rockwellautomation.com/go/scmicro800