Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis - Manual (Page 80)

70 Publication 2080-QS001A-EN-E - January 2013
Chapter 5 Execute Your Motion Control Function Blocks
Implementing Motion Control in an Actual Environment
While this quickstart allowed you to become more familiar with the different motion control function blocks and enabled
you to power up, home, and move a simulated axis, you will need to implement a different wiring configuration for an
actual environment (that is, with a Servo drive, motor).
To do this, you need to refer to the following publications for wiring and supporting configuration information:
• Micro830 and Micro850 Programmable Controllers User Manual, 2080-UM002 (see the chapter, "Positioning with
Embedded Pulse Train Outputs")
• Kinetix 3 Motion Control Indexing Application, CC-QS025