Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis - Manual (Page 17)

Publication 2080-QS001A-EN-E - January 2013 7
Configure Motion Axis Properties Chapter 2
Configure General Properties
Launch the Connected Components Workbench software.
1. Open the project you have
created in the previous chapter.
2. On the Project Organizer pane,
double-click the controller name
to bring up the Device
Properties pane.
3. Under the Controller properties
tree, go to Motion. Right-click
<New Axis> and choose Create.
4. Provide the name "Simulator"
for the axis. Alternatively, you
can press F2 to name the axis.