Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis User Manual
Page 78
Advertising
![background image](/manuals/580618/78/background.png)
68
Publication 2080-QS001A-EN-E - January 2013
Chapter 5 Execute Your Motion Control Function Blocks
3. To move the axis to the left, set
the direction input to -1.
IMPORTANT
The update for axis status is performed at the end of one
program scan cycle, and the update is aligned with the update
of Motion Axis status.
Advertising
This manual is related to the following products: