Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis - Manual (Page 59)

49 Publication 2080-QS001A-EN-E - January 2013 49
Chapter
4
Wire Your Controller for Motion Control
Introduction
In this chapter, you will wire your controller based on the sample project wiring configuration.
What You Need
• 2080-LC30-xxQVB, 2080-LC30-xxQBB, 2080-LC50-xxQBB, 2080-LC50-xxQVB controller
• PanelView Component (optional)
IMPORTANT The wiring diagram presented in this chapter serves the purpose of a simulation project only. To help you wire your
controller to an actual servo drive for motion control, refer to the chapter, "Positioning with Embedded Pulse Train
Outputs" in the Micro830 and Micro850 Programmable Controllers User Manual,
2080-UM002 .