Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis User Manual
Page 28
Advertising
18
Publication 2080-QS001A-EN-E - January 2013
Chapter 3 Write Your Motion Control Programs
5. On the Instruction Block
Selector window that appears,
type MC_Power on the default
entry field to filter the
MC_Power function block.
Choose MC_Power. Click OK.
6. From the Toolbox, double-click
Block to add it to the rung.
Alternatively, you can drag and
drop Block onto the rung.
Your ladder rung should appear as follows.
Advertising
This manual is related to the following products: