On the second rung, assign the variables as shown, On the third rung, assign the variables as shown – Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis User Manual

Page 45

Advertising
background image

Publication 2080-QS001A-EN-E - January 2013

35

Write Your Motion Control Programs Chapter 3

3. On the second rung, assign the

variables as shown.

4. On the third rung, assign the

variables as shown.

Advertising
This manual is related to the following products:

2080-LC30 Getting Started with Motion Control Using a Simulated Axis

Popular Brands
Popular manuals