Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis - Manual (Page 48)

38 Publication 2080-QS001A-EN-E - January 2013
Chapter 3 Write Your Motion Control Programs
6. On the Instruction Block
Selector window that appears,
type ANY_TO_SINT to filter
out the function block.
Choose ANY_TO_SINT.
Click OK.
7. Create a third rung. From the
Toolbox, select Rung and drag
and drop it onto the space just
below the second rung.
Your second rung should appear as follows: