On the third rung, assign the variables as shown, On the fourth rung, assign the variables as shown – Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis User Manual

Page 52

Advertising
background image

42

Publication 2080-QS001A-EN-E - January 2013

Chapter 3 Write Your Motion Control Programs

4. On the third rung, assign the

variables as shown.

5. On the fourth rung, assign the

variables as shown.

Advertising
This manual is related to the following products:

2080-LC30 Getting Started with Motion Control Using a Simulated Axis

Popular Brands
Popular manuals