Rockwell Automation 2080-LC50 Getting Started with Motion Control Using a Simulated Axis - Manual (Page 56)

46 Publication 2080-QS001A-EN-E - January 2013
Chapter 3 Write Your Motion Control Programs
11. From the Toolbox, select Block
and drag and drop it onto the
fourth rung.
12. On the Instruction Block
Selector window that appears,
type R_TRIG to filter out the
R_TRIG function block.
Choose R_TRIG. Click OK.
13. From the Toolbox, select Block
and drag and drop it onto the
fourth rung.