ADLINK PCI-8164 User Manual
Page 149
Advertising
![background image](/manuals/733467/149/background.png)
Operation Theory
137
The Value block in this figure is the position where the comparison
occurs, and where the data can be checked by using
_8164_check_compare_data().
Note that at the final compared point, load an After-final point into
the Value block. Fill a dummy point into the comparison table array
at the final position. This value must be far enough from the table’s
stroke.
If using _build_compare_function(), a dummy “after-final”
point is automatically loaded. This value is equal to (End point +
Interval x Total counts) x moving ratio.
Related functions:
X
_8164_set_trigger_comparator(),
_8164_build_comp_function()
X
_8164_build_comp_table(), _8164_set_auto_compare()
X
_8164_check_compare_data(),_8164_set_trigger_type ()
Refer to section 6.16
Advertising