ADLINK PCI-8164 User Manual
Page 234
![background image](/manuals/733467/234/background.png)
222
Function Library
alm_mode: Reacting modes when receiving an ALARM signal
X
alm_mode=0, motor immediately stops (default)
X
alm_mode=1, motor decelerates then stops.
el_mode: Reacting modes when receiving an EL signal
X
el_mode=0, motor immediately stops (default)
X
el_mode=1, motor decelerates then stops.
inp_enable: INP function enabled/disabled
X
inp_enable=0, Disabled (default)
X
inp_enable=1, Enabled
inp_logic: Set the active logic for the INP signal
X
inp_logic=0, active LOW
X
inp_logic=1, active HIGH
erc_logic: Set the active logic for the ERC signal
X
erc_logic=0, active LOW
X
erc_logic=1, active HIGH
erc_on_time: Set the time length of ERC active
X
erc_on_time=0, 12
µ
s
X
erc_on_time=1, 102
µ
s
X
erc_on_time=2, 409
µ
s
X
erc_on_time=3, 1.6ms
X
erc_on_time=4, 13ms
X
erc_on_time=5, 52ms
X
erc_on_time=6, 104ms
X
erc_on_time=7, Level output
on_off: ON-OFF state of SVON signal
X
on_off = 0 , ON
X
on_off = 1 , OFF
enable: Enable/disable the SD signal.
X
enable=0, Disabled (Default)
X
enable=1, Enabled