ADLINK PCI-8164 User Manual
Page 181
Function Library
169
Motion I/O Monitoring Section 6.13
Interrupt Control Section 6.14
Function Name
Description
_8164_get_io_status
Get all the motion I/O status of 8164
Function Name
Description
_8164_int_control
Enable/Disable INT service
_8164_int_enable
Enable event (For Windows only)
_8164_int_disable
Disable event (For Windows only)
_8164_get_int_status
Get INT Status (For Windows only)
_8164_link_interrupt
Set link to interrupt call back function (For Windows
only)
_8164_set_int_factor
Set INT factor
_8164_get_int_type
Get INT type (For DOS only)
_8164_enter_isr
Enter interrupt service routine (For DOS only)
_8164_leave_isr
Leave interrupt service routine (For DOS only)
_8164_get_event_int
Get event status (For DOS only)
_8164_get_error_int
Get error status (For DOS only)
_8164_get_irq_status
Get IRQ status (For DOS only)
_8164_not_my_irq
Not My IRQ (For DOS only)
_8164_isr0-9, a, b
Interrupt service routine (For DOS only)
_8164_set_axis_stop_int
Enable axis stop int
_8164_mask_axis_stop_int
Mask axis stop int