ADLINK PCI-8164 - Manual (Page 166)

154 Motion Creator
8. LTC Logic: Selects the logic of the LTC signal. The
related function call is _8164_set_ltc_logic().
9. Buttons:
Z
Next Axis: Changes the operating axis.
Z
Save Config: Saves current configuration to 8164.ini.
Z
Operate: Go to the operation menu. Refer to section
5.3.4.
Z Config Pulse & INT: Go to the Pulse I/O and Interrupt
Configuration menu. Refer to section 5.3.3.
Z
Back: Returns to the main menu.