ADLINK PCI-8164 - Manual (Page 165)

Motion Creator 153
1. ALM Logic and Response mode: Selects the logic and
response modes of ALM signal. The related function call
is _8164_set_alm().
2. INP Logic and Enable/Disable selection: Selects the
logic, and enables/disables the INP signal. The related
function call is _8164_set_inp()
3. ERC Logic and Active timing: Selects the Logic and
Active timing of the ERC signal. The related function call
is _8164_set_erc().
4. EL Response mode: Selects the response mode of the
EL signal. The related function call is
_8164_set_el().
5. ORG Logic: Selects the logic of the ORG signal. The
related function call is _8164_set_home_config().
6. EZ Logic: Selects the logic of the EZ signal. The related
function call is _8164_set_home_config().
7. SD Configuration: Configures the SD signal. The
related function call is _8164_set_sd().