Labconco Type C1 Biosafety Cabinet Models 30468 - Manual (Page 53)

Product Service 1-800-522-7658 53
7. The fourth screen allows you to select
whether the Axiom has a UV light or not. IT
IS CRITICAL THAT THE YOU LEAVE THE
UV LIGHT CONFIGURATION AS IT WAS
SET AT THE FACTORY. Press OK to return
to the first Configuration screen.
The unit is now properly configured for operation connected to an exhaust system. In
this mode, the unit will display an exhaust alarm if the inlet relief valve closes during
operation.
NOTE: If you ever want to disconnect the Axiom from the exhaust system, and use it in
a recirculating mode, you must reconfigure it as such.