Labconco Type C1 Biosafety Cabinet Models 30468 - Manual (Page 61)

Product Service 1-800-522-7658 61
Section Four -
Initial Operation of the Axiom
This section will take you through the steps to begin initial operation of the Axiom, with
an explanation the controls, display and options, in order to prepare the unit for its
initial certification.
System Reset Switch
The biosafety cabinet has a system reset switch for resetting its microprocessors. The
switch is located on the front of the electronics module, on top of the cabinet, as shown
in Figure 4-1. Ensure that the switch is in the “ON” (up) position before attempting to
operate the cabinet.
The System Reset
Switch
Figure 4-1