Labconco Type C1 Biosafety Cabinet Models 30468 - Manual (Page 96)

Product Service 1-800-522-7658 96
If the corner post lower trim pieces do not fit flush to the bottom edge of the metal
corner post, examine the front flange of the chassis. The flange should be straight. If it
is bent back, it can be straightened by bending the flange forward with an adjustable
wrench, as shown in Figure 6-4.
Figure 6-4
Front side of the Axiom
Axiom Chassis Flange
Using an adjustable wrench to
straighten the flange