Labconco Type C1 Biosafety Cabinet Models 30468 - Manual (Page 94)

Product Service 1-800-522-7658 94
External Dress Components
Front Dress Panel Removal and Installation
Figure 6-1
1.
Locate and remove the two Phillips screws that
secure the front panel as shown in Figure 6-1.
They are located on the bottom corners of the
front dress panel
2. Swing the bottom of the dress panel out to clear
the fluorescent light and then lift the front dress
panel straight up and away from the cabinet.
Figure 6-2
To reinstall the panel, reverse these steps, ensuring
that the plastic pin in the top corners of the dress
panel properly engage the corner posts.