HEIDENHAIN TNC 335 Technical Manual - Manual (Page 25)

8/95
TNC 360 2 Features and Specifications 2-3
2 Features and Specifications
2.1 TNC 360
Components
•
Logic unit LE 360
•
Keyboard TE 355 A, TE 355 B
•
Color graphics VDU BE 212 (12 inch, 512 x 256 pixels)
•
Flat luminescent screen BF 110 (192 mm x 120 mm, 640 x 400 pixels)
Control modes
•
Contouring control for 4 axes and spindle orientation
•
Linear interpolation in 3 of 4 axes
•
Circular interpolation in 2 of 4 axes
Program memory Buffered RAM memory (approx. 70 KB) for 32 NC programs,
central tool file, PLC program (if not filed in EPROM),
EPROM memory (128 KB) for PLC program, OEM cycles,
dialogues for OEM cycles, PLC error messages
Tool memory 99 tools
Operating modes
•
Manual operation
•
Electronic handwheel /jog positioning
•
Positioning by manual data input
•
Program run, single block
•
Program run, full sequence
•
Programming and editing
•
Test run (logical and graphical)
Programming In HEIDENHAIN conversational mode and according to ISO
Entry and display 1
µ
m, 5
µ
m, 10
µ
m, 50
µ
m, 100
µ
m
resolution