HEIDENHAIN TNC 335 Technical Manual - Manual (Page 357)

4/96
TNC 360 3 List of Machine Parameters 5-13
Machine
parameter Function and input Reaction /
CN 123 Page
MP3510.0
to
MP3510.7 Spindle speed for gear ranges
Input value: 0 to 99 999.999 [rpm] 4-82
MP3520.0 Spindle speed activated by marker M2501
Input value: 0 to 99 999.999 [rpm] 4-96
MP3520.1 Spindle speed for spindle orientation
Input value: 0 to 99 999.999 [rpm] 4-93
3.6 Integrated PLC
Machine
parameter Function and input Reaction /
CN 123 Page
MP4010 PLC program from RAM or from EPROM
Input: 0 or 1
0 = EPROM operation
1 = RAM operation
RESET 7-21
MP4060.0
to
MP4060.4 Path dependent lubrication
Input range: 0 to 65 535
(units of 65 536 µm) 4-18
MP4110.0
to
MP4110.47 Time for timers
Input range: 0 to 65 535 [PLC cycles]
(TNC 360: 20 ms)
7-19
MP4120.0
to
MP4120. 31 Preset value for counters C0 to C31
Input range: 0 to 65 535 [PLC cycles] 7-21
MP4130 Fast PLC input to suppress the monitoring
functions
Input value: 0 to 255 [No. of the PLC input] 4-68
MP4131 Activation condition for fast PLC input from
MP4130
Input value: 0 or 1 4-68
MP4210.0
to
MP4210.47 Set a number in the PLC (D768 to W 988)
Input range:
–99 999.9999 to +99 999.9999 [mm] or [°] 7-17
MP4220.0
to
MP4220.3 Set a number in the PLC in the word range W960
to W966
Input: 0 to 65 535 7-17