HEIDENHAIN TNC 335 Technical Manual - Manual (Page 73)

8/95
TNC 360 11 PLC inputs/outputs 3-49
11.5 PL 410 B / PL 410 PLC I/O unit
The PL 410 B / PL 410 has 64 PLC inputs, 31 PLC outputs and one "control-is-operational" output.
In its interface to the LE and its load capacity of inputs and outputs it is identical to the PL 400.
The analog inputs (X15 to X22) of the PL 410 cannot be evaluated in the LE 360 C! The DIL switch
on the PCB of the PL 410 must therefore be set to OFF (as is stated on the housing). The PLC
outputs are powered in groups and are therefore switched off via EMERGENCY STOP in groups.
Connecting cable
LE PL 410B
PL 410
X1
max. 20 m
Id.-Nr. 263 662 ..