HEIDENHAIN TNC 335 Technical Manual - Manual (Page 348)

5-4
TNC 360 3 List of Machine Parameters 4/96
3 List of Machine Parameters
3.1 Measuring systems and machines
Machine
parameter Function and input Reaction/
CN 123 Page
MP10 Active axes
Input range: 1 to 15
Bit 0 X axis +0 = not active
+1 = active
Bit 1 Y axis +0 = not active
+2 = active
Bit 2 Z axis +0 = not active
+4 = active
Bit 3 4th axis +0 = not active
+8 = active
RESET 4-5
MP30 Checking the absolute position of the
distance-coded reference marks
Input range: 0 to 15
Bit 0 X axis +0 = not active
+1 = active
Bit 1 Y axis +0 = not active
+2 = active
Bit 2 Z axis +0 = not active
+4 = active
Bit 3 4th axis +0 = not active
+8 = active
4-8
MP31 Checking the amplitude of the measuring
system signals
Input range: 0 to 31
Bit 0 X axis +0 = not active
+1 = active
Bit 1 Y axis +0 = not active
+2 = active
Bit 2 Z axis +0 = not active
+4 = active
Bit 3 4th axis +0 = not active
+8 = active
Bit 4 S axis +0 = not active
+16 = active
4-8