HEIDENHAIN TNC 335 Technical Manual - Manual (Page 27)

8/95
TNC 360 2 Features and Specifications 2-5
Control
•
4 inputs for position measuring systems (4 sinusoidal inputs)
inputs
•
1 measuring system input for spindle orientation (square-wave input
signal)
•
1 input for electronic handwheel
•
1 input for 3D-touch probe system
•
55 PLC inputs + 1 control-is-ready input
•
Additionally 64 PLC inputs on optional PLC I/O board PL 410 B
Control
•
5 analogue outputs for the spindle and axes
outputs
•
31 PLC outputs + 1 control-is-ready output
•
Additionally 31 PLC outputs on optional PLC I/O board PL 410 B
Integrated PLC
•
Programming in the form of a list of instructions, max. 4000 PLC
commands
•
Entry by HEIDENHAIN keyboard or data interface
Supply NC: 24 Vdc
(
See Chapter 3, Section 4.1)
voltage PLC: 24 Vdc
Power NC: approx. 27 W (with BE 212 connected)
consumption PLC: approx. 48 W
(
See Chapter 3, Section 4.1)
PL 410 B: approx. 480 W
(
See Chapter 3, Section 4.1)
BF 110: approx. 33 W
Environmental
•
Operating: LE/BE 0 to 45° C (32 to 113° F)
temperature BF 110: 0 to 40° C (32 to 104° F)
•
Storage: –30 to 70° C (–22 to 158° F)
Approximate LE 360 C: 8.0 kg
weight TE 355: 1.6 kg
BE 212: 11.0 kg
BF 110: 1.7 kg
PL 410 B: 1.5 kg
HRA 110: 0.7 kg