HEIDENHAIN TNC 335 Technical Manual - Manual (Page 254)

8/95
TNC 360 9 Touch Probe 4-157
MP 6254 Numerical value for M function for transferring modal values
Input value:
0 = no take-over
1 to 89 = take-over with M (1 ... 89)
MP6260 Output of M90 for NC blocks with digitized data
Input value: 0 = no M90 output
1 = M90 output in each NC block
MP6270 Rounding of trailing zeros
Input value:
0 = output 0.001 mm steps (1µm)
1 = output 0.01 mm steps (10 µm)