HEIDENHAIN TNC 335 Technical Manual - Manual (Page 68)

8/95
TNC 360 11 PLC inputs/outputs 3-43
11.3 Connecting cable
Please use only HEIDENHAIN connecting cables.
The length of cable between the logic unit and the element to be switched is limited to 25 m.
HEIDENHAIN recommends building a transfer unit with a terminal strip into the switch cabinet.
This transfer unit can be connected to the logic unit with the HEIDENHAIN connecting cable Id.-Nr.
244 017 ..
max. 25 m
Id.-Nr. 244 017..
If operation is to be without transfer unit, then the HEIDENHAIN connecting cable
Id.-Nr. 244 005 .. can be used.
max. 25 m
Id.-Nr. 244 005..
Terminal color assignments:
1 = GY/RD 14 = GN/BL 27 = YL/BK
2 = BN/BK 15 = YL 28 = WH/YL
3 = WH/BK 16 = RD 29 = GY/BL
4 = GN/BK 17 = GY 30 = PK/BL
5 = BN/RD 18 = BL 31 = PK/RD
6 = WH/RD 19 = PK 32 = BN/BL
7 = WH/GN 20 = WH/GY 33 = PK/GN
8 = RD/BL 21 = YL/GY 34 = BN
9 = YL/RD 22 = GN/RD 35 = YL/PK
10 = GY/PK 23 = WH/PK 36 = VI
11 = BK 24 = GY/GN 37 = WH
12 = PK/BN 25 = YL/BN
13 = YL/BL 26 = GY/BN
If the connector is to be assembled in the field, a 37-pin solderable connector is available from
HEIDENHAIN (Id.-Nr. 243 937 ZY).